Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
Sym Jet Euro X servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. “V” TYPE BELT DRIVE SYSTEM/KICK-STARTER<br />
Reassembly Of Kick Starter<br />
Install bush, return spring and starter spindle as<br />
diagram shown.<br />
Install thrust washer and snap clip onto starter<br />
spindle.<br />
Install Kick starter lever temporary.<br />
Slightly rotate the lever and then align driven<br />
gear with width-tooth on the starter spindle.<br />
Install the friction spring of drive gear onto<br />
convex part of the cover.<br />
Installation Of The Left Crankcase<br />
Cover<br />
Install the dowel pin and gasket.<br />
Install the left crankcase cover.<br />
Install kick start arm.<br />
7-4<br />
This chapter Contents<br />
Return spring<br />
Dowel pin<br />
Width-tooth<br />
Convex part<br />
Kick starter spindle<br />
Driven gear<br />
Friction spring