Ektron CMS200/300 User Manual

NOTE
Inserting Images
The title is also the alt text for the image. The alt text appears in place of the
image on the Web page if the image itself cannot display for any reason.
5. Information about the picture’s file size, width and height
appears in the upper right corner of the dialog box.
6. If you want to view a picture before inserting it, click Preview
(on the right side of the dialog box).
7. Click OK.
8. The Picture Properties dialog box reappears. Here, you can
change the picture’s properties. For more information, see
“Adjusting a Picture” on page 238
“Setting a Border” on page 240
“Aligning the Picture” on page 241
“Adding Space around the Picture” on page 243
“Editing the Picture’s Title” on page 244
9. Click OK to insert the picture into the editor.
Using the Second Media Selection Dialog Box
When using the second Media Selection dialog box, you can insert
a picture from any folder available to your computer (whether the
folder is on your computer or a remote computer) or from the Web
server. Your Webmaster determines which pictures are available
on the Web server.
To insert a picture from
a folder available to your computer, click Select New File,
navigate to the file of interest, and click OK.
the Web server, click the Select Server File button.You are
prompted to enter a User Name and Password. Your
Webmaster assigns these codes to you, which are needed to
copy the file to the Web server.
Next, the Image Explorer dialog appears (illustrated below).
Navigate through the folder structure until you find the image.
Then click OK to insert the image into eWebeditPro+XML.
Ektron CMS200/300 User Manual, Version 4.5, Revision 3 237