Manual tehnic automate cafea Saeco Group 500

ESPRESSO COFFEE
This process takes place only after the
dispensing of the cup, the sugar and the stirrer.
• the grinder (ref. 1 fig.8) is engaged and runs
until the ground coffee dose set by the dosing
unit (ref 2 fig.8) is reached.
fig.8
• the electromagnet of the dosing unit (ref. '3'
fig.8) controls the door opening and the
subsequent falling of the coffee into the
brewing cup.
fig.9
• the group rotation gearmotor moves the group
onto the brewing position and compresses
the coffee tablet (fig.9).
fig.7
English
• controlled by the appropriate electronic device
(volumetric counter - ref. '3' fig.7), the pump
dispenses the preset quantity of water sucked
from the coffee boiler.
• the brew group gearmotor goes back to its rest
position while the used coffee tablet is ejected.
According to the type of program set (see
programming menu), the above procedure for
the grinder and dosing unit engagement can take
place in reverse.
13