Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 10 - - INACTIVITY<br />
INACTIVITY<br />
If the automatic vending machine remains<br />
inactive for a long time it is necessary to take<br />
certain preventive measures:<br />
- while the vending machine is on, start the<br />
automatic emptying process in the SERVICE<br />
mode (see section 8)<br />
- at the end, disconnect the machine either<br />
from the electrical and water circuit<br />
- complete the emptying of the tank with float,<br />
by removing the plug located on the hose<br />
along the drain chute<br />
- replace the plug once the emptying has been<br />
completed (fig.63)<br />
fig.63<br />
- unload all products from their containers<br />
(fig.64)<br />
fig.64<br />
fig.65<br />
1°C<br />
English<br />
- wash all the parts in contact with foodstuffs<br />
according to the procedures already<br />
described<br />
- empty the liquid waste bin and clean it<br />
thoroughly<br />
- remove the grounds bag<br />
- clean all the internal and external surfaces of<br />
the machine with a cloth<br />
- protect the outside of the machine with plastic<br />
film or a bag (fig.65)<br />
- store in a dry and sheltered place at<br />
temperatures not lower than 1°C.<br />
47