Manual tehnic automate cafea Saeco Group 500

- Position the vending machine, checking the
levelling by means of the adjustable feet
already assembled on the machine (fig.11).
Make sure that the vending machine does not
have an inclination exceeding 2 degrees.
fig.11
The SAECO International Group declines all
responsibility for inconveniences due to the
failure in observing the above mentioned
installation rules.
If installation takes place in safety evacuation
corridors, make sure that the machine with the
door open assure sufficient space for people to
pass by (fig. 10).
In order to avoid the floor to get dirty as a result
of accidental spillage of products, use, if
necessary, a sufficiently wide protecting device
to cover the operating area under the vending
machine.
6.2 Receipt
Upon receipt of the automatic vending machine,
it is necessary to check it has not suffered
damage during transport. If damage of any kind
is noticed, immediately place a claim with the
forwarder.
An envelope is supplied with the vending
machine, called 'CUSTOMER KIT', containing
the objects shown in Fig. 12.
fig.12
fig.13
- Instruction booklet.
- Powder tank plates and prices in
euro.
- Pushbutton panel selection
labels.
- Instruction labels.
- Wiring and hydraulic diagram.
- Power cord.
- Safety micro key
(Maintenance technician).
- Declaration of conformity.
6.3 Unpacking
English
- Free the vending machine from the packaging,
cutting the protective film in which it is wrapped,
along one of the protection angles (fig.13).
15