Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
Manual tehnic automate cafea Saeco Group 500
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
English<br />
6.8.6 Payment system installation<br />
The machine does not have a payment system.<br />
Any possible damage to the vending machine<br />
itself and injury to people resulting from its<br />
incorrect installation are the responsibility of the<br />
installer of the payment system.<br />
- remove the support bracket from the machine<br />
(fig. 39)<br />
26<br />
fig.39<br />
A B<br />
fig.40<br />
- hook the coiner unit to the support bracket<br />
(fig.40A)<br />
- fix the support bracket by means of the two<br />
knobs (fig. 40B)<br />
- connect the coiner unit to the CPU board.<br />
N.B.: The 24Vdc coin validator and the MDB<br />
systems have to be directly connected to the<br />
CPU board while the executive serial systems<br />
have to be connected to the CPU board through<br />
the supplied interface cable.<br />
The 12Vdc coin validators require a special<br />
interface board in order to be connected to the<br />
CPU board.<br />
- Then, access the programming for the<br />
correct settings.<br />
Refer to section '7 PROGRAMMING' to verify if<br />
the parameter setting is consistent with the<br />
system used.
Change language