EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.3 Home search<br />
Home search may be done in 2 ways:<br />
Homing all the axes<br />
ZERO<br />
Homing a single axis<br />
It executes the home search subroutine defined by the OEM in<br />
general machine parameters P34 (REFPSUB).<br />
The CNC keeps the part zero or zero offset that is active.<br />
If the home search subroutine has not been defined, the CNC will display the<br />
corresponding error message.<br />
A R ZERO<br />
X<br />
J " ZERO<br />
Z<br />
It homes the X axis.<br />
It homes the Z axis.<br />
The CNC will not maintain the part zero or zero offset active at the time and<br />
assumes the machine reference zero as the new part zero.<br />
Operating <strong>man</strong>ual<br />
OPERATING IN JOG MODE<br />
Home search 2.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·17·