EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Standard handwheel<br />
General handwheel<br />
1. Select the axis to be jogged.<br />
Press one of the JOG keys of the axis to be jogged. The selected axis will be<br />
highlighted.<br />
When using a FAGOR handwheel with an axis selector button, the axis may be<br />
selected as follows:<br />
Push the button on the back of the handwheel. The CNC select the first axis<br />
and it highlights it.<br />
When pressing the button again, the CNC selects the next axis and so on in<br />
a rotary fashion.<br />
To deselect the axis, hold the button pressed for more than 2 seconds.<br />
2. Jog the axis.<br />
Once the axis has been selected, it will move as the handwheel is being turned<br />
and in the direction indicated by it.<br />
Individual handwheels<br />
Each axis will move as the corresponding handwheel is being turned according to<br />
the switch position and in the direction indicated by it.<br />
Simultaneous handwheels<br />
The machine may have a general handwheel and up to 3 individual handwheels<br />
associated with each axis.<br />
The individual handwheels have priority over the general handwheel. So, if an<br />
individual handwheel is moving, the general handwheel will be ignored.<br />
Operating <strong>man</strong>ual<br />
OPERATING IN JOG MODE<br />
Jog movement 2.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·21·
Change language