EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating <strong>man</strong>ual<br />
4.<br />
SAVING PROGRAMS<br />
Modify a part-program<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·56·<br />
4.6 Modify a part-program<br />
To modify a part-program, proceed as follows:<br />
Press [P.PROG] to access the list of part-programs stored.<br />
Select, with the pointer, the part-program to be modified from the left column.<br />
Once the program has been selected, the CNC lets:<br />
To delete an operation.<br />
4.6.1 Delete an operation<br />
To move an operation to another position.<br />
To add or insert a new operation.<br />
To modify an existing operation.<br />
To delete an operation, proceed as follows:<br />
Select, with the pointer, the operation to be deleted from the right column.<br />
Press [CLEAR].<br />
The bottom of the screen will show a message requesting confirmation of the<br />
deleting operation.<br />
If [<strong>EN</strong>TER] is pressed, the CNC will delete the selected operation and will update<br />
the right column.<br />
If [ESC] is pressed, the operation will not be deleted and it will quit deleting<br />
operation.<br />
4.6.2 Move an operation to another position<br />
To move an operation to another position, proceed as follows:<br />
Select, with the pointer, the operation to be moved from the right column.<br />
Press the [TWO-COLOR] key.<br />
The CNC will highlight that operation.<br />
Place the cursor on the operation after which the operation is to be placed and<br />
press [<strong>EN</strong>TER].<br />
Example: You get You want<br />
1.- User cycle 2<br />
2.- User cycle 5<br />
3.- User cycle 11<br />
4.- User cycle 3<br />
5.- User cycle 1<br />
6.- User cycle 8<br />
7.- User cycle 9<br />
Select "User cycle 5" and press the [TWO-COLOR] key.<br />
Place the cursor on "User cycle 8" and press [<strong>EN</strong>TER].<br />
1.- User cycle 2<br />
2.- User cycle 11<br />
3.- User cycle 3<br />
4.- User cycle 1<br />
5.- User cycle 8<br />
6.- User cycle 5<br />
7.- User cycle 9