EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.4.1 Tool inspection<br />
Depending on how the PLC mark TOOLINSP has been set, the tool inspection mode<br />
will be available after interrupting the execution or it will be necessary to interrupt the<br />
execution and press the [T] key.<br />
Once tool inspection has been selected, it is possible:<br />
Move the axes to the tool change point:<br />
Use the keys or the handwheels to move the tool to the position where the tool<br />
change will be carried out.<br />
Select another tool:<br />
The standard screen of the CO mode must be selected in order to be able to make<br />
a tool change.<br />
Press the [T] key. The CNC highlights the tool number.<br />
Type in the number of the tool to be selected and press [START] so the CNC<br />
selects the new tool.<br />
The CNC will <strong>man</strong>age the tool change.<br />
Resuming program execution:<br />
Press the [START] key to resume program execution.<br />
The CNC will reposition the tool by moving it to the point where tool inspection<br />
began. There may be 2 cases:<br />
1. Only one axis moved.<br />
The CNC repositions it and resumes the execution.<br />
2. Both axes moved.<br />
The CNC shows a window with the possible options. Choose the desired<br />
repositioning order.<br />
Operating <strong>man</strong>ual<br />
EXECUTION AND SIMULATION<br />
Execution mode 5.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·63·
Change language