EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating <strong>man</strong>ual<br />
2.<br />
OPERATING IN JOG MODE<br />
Jog movement<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·18·<br />
2.4 Jog movement<br />
The axes of the machine can move as follows:<br />
Movement to the programmed coordinate.<br />
Incremental move.<br />
Continuous movement.<br />
Movement with an electronic handwheel.<br />
2.4.1 Movement to the programmed coordinate<br />
The axes move one by one. With the feedrate «F» and % currently selected.<br />
[X] Coordinate [START] [Z] Coordinate [START]<br />
2.4.2 Incremental movement<br />
JOG<br />
Turn the JOG switch to one of the incremental jog positions.<br />
1<br />
10<br />
100<br />
1<br />
JOG<br />
10<br />
100<br />
1000<br />
10000<br />
100 10<br />
JOG<br />
1 1<br />
10<br />
100<br />
1000<br />
10000<br />
The incremental movement must be made one axis at a time.<br />
To do that, press the JOG keys for the direction of the axis to<br />
be jogged.<br />
Every time a key is pressed, the corresponding axis moves the<br />
amount set by the switch. This movement is made at the<br />
selected feedrate «F».<br />
Switch position Distance<br />
1 0.001 mm or 0.0001 inches<br />
10 0.010 mm or 0.0010 inches<br />
100 0.100 mm or 0.0100 inches<br />
1000 1.000 mm or 0.1000 inches<br />
10000 10.000 mm or 1.0000 inches
Change language