EN: man_8055tco_user.pdf - Fagor Automation

3.5 Cycle data entry
Once the cycle has been selected, the CNC shows the relevant screen. It may have
a blue frame at the top right indicating the current status of the machine. Coordinates
and machining conditions.
15:28:42 IN POSITION
X
USER CYCLE 1
Xf, Zf
Xi, Zi
SPINDLE CONDITIONS
RPM S 200
GEAR
CSS SMAX 1200 1 2 3 4
Coordinates (Xi, Zi)
X 229.4552 Z -419.3305
Coordinates (Xf, Zf)
X 229.4552 Z -419.3305
One of the data that define the cycle will be highlighted indicating that it is selected.
To select another data, use the [] [] keys.
There are different types of data that are define as follows:
Numeric data that is used for coordinates, feedrate, spindle speed, tool number, etc.
(value in WINDRAW55).
X 00044.000
Key in the desired value and press [ENTER].
In certain cases, the value of an internal variable (coordinate,
tool number, etc.) may be assigned to this field. In those cases,
press [RECALL] and [ENTER].
Numeric data for selecting a profile (3-character unsigned integer value in
WINDRAW55).
PROFILE 001
Key in the number of the desired profile and press [RECALL].
The CNC accesses the profile editor.
Select an option among those available (button in a group of buttons of
WINDRAW55).
GEAR
1 2 3 4
Z
X 00044.000 Z -00397.490
F 1.000 S 150 T 3
MACHINING CONDITIONS
FEEDRATE (F)
TOOL (T)
MATERIAL
10000.0000
2
ALUMINUM
Use the [] [] keys.
Select one of the representations in an icon (multiple in WINDRAW55).
Press the [TWO-COLOR] button until the desired icon appears:
X-Z
Z-X
X 00044.000 Z -00397.490
F 1.000 S 150 T 3
To de-select a cycle and return to the standard screen, press the key for the selected
cycle or the [ESC] key twice.
The CNC lets combine, in a single part-program, several cycles and blocks edited
in ISO code. Chapter "4 Saving programs" describes in detail how to do it and how
to use those programs.
Operating manual
WORKING WITH OPERATIONS OR CYCLES
Cycle data entry 3.
·MCO/TCO·
Option
Soft: V01.0x
·45·