EN: man_8055tco_user.pdf - Fagor Automation

Operating manual
4.
SAVING PROGRAMS
List of saved programs
·MCO/TCO·
Option
Soft: V01.0x
·52·
4.1 List of saved programs
Press [P.PROG] to access the list of saved part-programs.
15:28:42 IN POSITION
PROGRAMS - PARTS CYCLES
- - - CREATE NEW PART - - -
1 - XFT123
2 - ABZ 2343
22 -
23 -
128 - MTB 234A
285 - XFT 127B
764 -
777 -
832 - ABZ2347C
833 -
1234 -
1236 - MTB 238
1245 - MTB 3434
The left side shows the list of part-programs that are saved in the CNC's memory.
When there are more programs than those appearing in the window, use the [] and
[] keys to move the pointer over the list of programs. Use the [SHIFT] [] and
[SHIFT] [] keys to scroll a page at a time.
The right column shows the cycles and blocks in ISO code that make up the part.
Once the list of programs has been selected, the CNC lets:
Creating a new part-program.
Seeing the contents of a part-program.
Deleting a new part program.
Copying a part-program into another one.
Modifying a part-program.
To exit the directory or list of part-programs, press:
The [ESC] key.
The key for an operation or cycle.
The [ISO] key.
1.- POSITIONING 1
2.- USER CYCLE 5
3.- USER CYCLE 3
4.- USER CYCLE 7
In the WINDRAW55 application, the text for the title should be defined with
the same number as the cycle. Since the CNC shows, next to the number, the
title of the cycle (text of the program P999995 of the same number)