EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.2 See the contents of a program<br />
To see the contents of a part-program, select it on the left column using the pointer.<br />
To do that, use the [] and [] keys.<br />
The right column shows the cycles that make up the part.<br />
When pressing [<strong>EN</strong>TER] or one of the [] or [] keys, the pointer switches to the right<br />
column.<br />
Now, the [] and [] keys may be used to move the pointer over the blocks or cycles<br />
that make up the part.<br />
Briefly, use the keys:<br />
[] and []to move up and down in each column.<br />
[] and [] to change columns.<br />
Once an operation has been selected, the CNC lets:<br />
To see the operation in detail.<br />
To delete the operation.<br />
To move the operation to another position.<br />
To modify the operation.<br />
4.2.1 See one of the cycles in detail<br />
Once the desired operation has been selected using the pointer, press [RECALL].<br />
The CNC will extract the data saved and will display them on the screen of the<br />
corresponding cycle and, once there, it will be possible to:<br />
Modify data.<br />
Simulate the operation. See chapter "5 Execution and simulation".<br />
Execute the operation. See chapter "5 Execution and simulation".<br />
Save the operation again. Replacing the previous one or inserting it as a new one.<br />
Operating <strong>man</strong>ual<br />
SAVING PROGRAMS<br />
See the contents of a program 4.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·53·