EN: man_8055tco_user.pdf - Fagor Automation

More documents

Recommendations

Info

Operating <strong>man</strong>ual 5. EXECUTION AND SIMULATION Simulating or executing an operation or cycle ·MCO/TCO· Option Soft: V01.0x ·60· 5.1 Simulating or executing an operation or cycle All operations or cycles have 2 work modes: Execution and edit mode. 15:28:42 IN POSITION USER CYCLE 1 X Xf, Zf Simulation: Xi, Zi SPINDLE CONDITIONS RPM S 200 GEAR CSS SMAX 1200 1 2 3 4 Z Coordinates (Xi, Zi) X 229.4552 Z -419.3305 Coordinates (Xf, Zf) X 229.4552 Z -419.3305 MACHINING CONDITIONS FEEDRATE (F) TOOL (T) MATERIAL 10000.0000 2 ALUMINUM 15:28:42 IN POSITION SPINDLE CONDITIONS RPM S 200 GEAR CSS SMAX 1200 1 2 3 4 Execution mode Edit mode. Coordinates (Xi, Zi) X 229.4552 Z -419.3305 Coordinates (Xf, Zf) X 229.4552 Z -419.3305 MACHINING CONDITIONS FEEDRATE (F) TOOL (T) MATERIAL The operation or cycle may be simulated in both work modes. To do that, press the [GRAPHICS] key. The CNC shows the graphic screen. Execution: An operation or cycle can only be executed in the cycle execution mode. Press [ESC] to switch from edit mode to execution mode. Press [START] to execute an operation or cycle. X USER CYCLE 1 Xf, Zf Xi, Zi Z X 00044.000 Z -00397.490 F 1.000 S 150 T 3 10000.0000 2 ALUMINUM
5.2 Simulating or executing a part-program Proceed as follows to simulate or execute a part-program: Press [P.PROG] to access the list of part-programs stored. Select on the left column the program to be simulated or executed. Press [GRAPHICS] to simulate the part-program and [START] to execute it. 5.2.1 Simulating or executing a portion of a part-program Proceed as follows to simulate or execute a portion of a part-program: Press [P.PROG] to access the list of part-programs stored. Select the program from the left column and the operation (on the right column) from which to begin executing or simulating the part program. Press [GRAPHICS] to simulate the part-program and [START] to execute it. When executing a portion of a program, the CNC does not execute the initial subroutine 9998 that is associated with all part-programs. 5.3 Simulating or executing an operation that has been saved Proceed as follows to simulate or execute an operation that has been saved as a part of program: Press [P.PROG] to access the list of part-programs stored. Select the program that contains it from the left column and the operation to be simulated or executed from the right column. Press the [RECALL] key. Press [GRAPHICS] to simulate the operation and [START] to execute it. Operating <strong>man</strong>ual EXECUTION AND SIMULATION Simulating or executing a part-program 5. ·MCO/TCO· Option Soft: V01.0x ·61·
Page 1 and 2:
CNC 8055 MCO/TCO Operating manual R
Page 3 and 4:
CHAPTER 1 GENERAL CONCEPTS INDEX 1.
Page 5 and 6:
GENERAL CONCEPTS 1.1 M/T and CO wor
Page 7 and 8:
Keys related to operations or canne
Page 9 and 10: 1.3 Keyboard customizing The machin
Page 11 and 12: OPERATING IN JOG MODE The standard
Page 13 and 14: 5. This whole window may be customi
Page 15 and 16: 6. This window shows the status of
Page 17 and 18: 2.3 Home search Home search may be
Page 19 and 20: 2.4.3 Continuous movement Place the
Page 21 and 22: Standard handwheel General handwhee
Page 23 and 24: Feed handwheel mode Usually, when m
Page 25 and 26: 2.5.2 Variable tool change point If
Page 27 and 28: 2.6 Spindle control The standard sc
Page 29 and 30: 2.6.2 Constant surface speed Availa
Page 31 and 32: 2.7 ISO management Pressing the ISO
Page 33 and 34: WORKING WITH OPERATIONS OR CYCLES U
Page 35 and 36: 3.1 Associated programs In CO mode,
Page 37 and 38: 3.3.2 Configuration file The config
Page 39 and 40: ;(FORMAT W8,LEDBARDEC) It must be u
Page 41 and 42: 3.3.3 Associated subroutine The OEM
Page 43 and 44: 3.3.4 Error log file (P999500) Ther
Page 45 and 46: 3.5 Cycle data entry Once the cycle
Page 47 and 48: 3.8 Positioning cycle This cycle ma
Page 49 and 50: 3.8.2 Definition of spindle conditi
Page 51 and 52: SAVING PROGRAMS 4 A part-program is
Page 53 and 54: 4.2 See the contents of a program T
Page 55 and 56: 4.4 Delete a new part program To de
Page 57 and 58: 4.6.3 Add or insert a new operation
Page 59: EXECUTION AND SIMULATION 5 The simu
Page 63 and 64: 5.4.1 Tool inspection Depending on
Page 65 and 66: Graphic parameters: Simulation spee
Page 67 and 68: Operating manual ·MCO/TCO· Option
show all

EN: man_8055tco_user.pdf - Fagor Automation

Create successful ePaper yourself

Delete template?

Save as template?