EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.8 Positioning cycle<br />
This cycle may be defined in two ways:<br />
Level 1:<br />
You must define The coordinates of the target point.<br />
How the movement is to be carried out.<br />
Type of feedrate, rapid or at the selected F.<br />
Level 2:<br />
It selects the positioning cycle.<br />
15:28:42 IN POSITION<br />
X<br />
RPM<br />
POSITIONING 1<br />
GEAR<br />
2<br />
SMAX 1230<br />
X, Z<br />
F 0.000 S 150 T 3 D 3<br />
15:28:42 IN POSITION<br />
X<br />
RPM<br />
POSITIONING 2<br />
GEAR<br />
2<br />
SMAX 1230<br />
X, Z<br />
F 0.000 S 150 T 3 D 3<br />
You must define The coordinates of the target point.<br />
How the movement is to be carried out.<br />
Type of feedrate, rapid or at the selected F.<br />
The auxiliary functions that will be executed before and after<br />
the movement.<br />
To switch levels within each group, press the [LEVEL CYCLE] key.<br />
Z<br />
Z<br />
X 00044.000 Z -00397.490<br />
F 1.000 S 150 T 3<br />
Coordinates (Xi, Zi)<br />
X 229.4552 Z -419.3305<br />
X 00044.000 Z -00397.490<br />
F 1.000 S 150 T 3<br />
Coordinates (Xi, Zi)<br />
X 229.4552 Z -419.3305<br />
Aux. Func. Start Aux. Func. End<br />
Operating <strong>man</strong>ual<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Positioning cycle 3.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·47·
Change language