EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
EN: man_8055tco_user.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.6 Spindle control<br />
The standard screen of the CO mode has a window that shows the following spindle<br />
related data.<br />
This whole window may be customized.<br />
Depending on the model, the one provided by <strong>Fagor</strong> can show the following<br />
information:<br />
S 0100<br />
% 115<br />
SMAX 1000<br />
RANGE 1<br />
CSS 0100<br />
% 115<br />
SMAX 1000<br />
RANGE 1<br />
S 0100<br />
% 115<br />
SMAX 1000<br />
RANGE 1<br />
CSS RPM<br />
The data shown in that window depends on the selected work mode:<br />
(RPM) Spindle in revolutions per minute.<br />
(CSS) Constant surface speed. Available only at the TCO model.<br />
On CNC power-up and after the keystroke sequence [SHIFT] [RESET], the CNC<br />
selects the rpm mode.<br />
Operating <strong>man</strong>ual<br />
OPERATING IN JOG MODE<br />
Spindle control 2.<br />
·MCO/TCO·<br />
Option<br />
Soft: V01.0x<br />
·27·