PT-F100U
PT-F100U
PT-F100U
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Projection method<br />
Setting up<br />
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,<br />
See “INSTALLATION” on page 37..<br />
Setting on a desk/floor and<br />
projecting from front<br />
Setting on a desk/floor and<br />
projecting from rear<br />
INSTALLATION: FRONT/DESK INSTALLATION: REAR/DESK<br />
Mounting in the ceiling and<br />
projecting from front<br />
Mounting in the ceiling and<br />
projecting from rear<br />
INSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILING<br />
NOTE:<br />
• A translucent screen is required for rear projection.<br />
• When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKF100H, ET-PKF100S) is required.<br />
• See “Ceiling mount bracket safeguards” on page 44.<br />
Front leg adjusters and throwing angle<br />
You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.<br />
See “Positioning the image” on page 24.<br />
NOTE:<br />
• Heated air comes out of the Air exhaust port. Do not touch the Air exhaust port directly.<br />
• If keystone distortion occurs, see “KEYSTONE” on page 34.<br />
ENGLISH - 17<br />
Getting Started