LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHAPTER 2<br />
CABLE SETUP PROCEDURES<br />
SETTING PREFERENCES<br />
Most of the tester configuration parameters are set from the Preferences screen.<br />
To open the Preferences screen:<br />
1. Select Preferences on the Ready screen. The Preferences screen appears.<br />
Figure 2-1: Preferences Screen<br />
2. Use the UP/DOWN ARROW keys to select one or more options. These options<br />
are described in the sub-sections below.<br />
USER INFORMATION<br />
<strong>User</strong> information identifies the unit operator for test reports.<br />
3. Select <strong>User</strong> Information on the Preferences screen. The <strong>User</strong> Information screen<br />
appears.<br />
Figure 2-2: <strong>User</strong> Information Screen<br />
4. Use the ALPHA/NUMERIC keys to enter your name. Press the LEFT/RIGHT<br />
ARROW keys to move the cursor from one character to the next.<br />
5. Use the UP/DOWN ARROW keys to move between the fields.<br />
6. Press ENTER to save or ESCAPE to exit.<br />
Note: In most screens, press ESCAPE, the user will have the option to save or not<br />
save the changes selected during this procedure.<br />
2-1
Change language