LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3<br />
Structured Cable Field Calibration and Testing<br />
Figure 3-6: Test Options Screen<br />
Table 3-4: Test Options<br />
Option<br />
Select All<br />
Select All Passed<br />
Select All Failed<br />
De-select All<br />
Print Selected<br />
Print All<br />
Restore All Deleted Tests<br />
Delete Selected Test<br />
Delete All<br />
Result Info<br />
Selected Result Info<br />
Rename Test<br />
Description<br />
Select all stored test results.<br />
Select only passed tests for processing.<br />
Select only failed tests for processing.<br />
Unmark all stored test results.<br />
Print selected test results.<br />
Print a summary of stored test results.<br />
Restore all deleted test.<br />
Delete marked test results.<br />
Delete all stored test results.<br />
Display test result information such as number of tests, number<br />
passed and failed, length tested, and memory used.<br />
Display the results of selected tests.<br />
Rename selected test result.<br />
AUTOTEST GRAPHS<br />
Autotest results can be viewed at the completion of the test sequence in either a<br />
tabular or graphical format.<br />
Graphing Facts<br />
Graphs can be very useful for viewing test results. There are a few things you need to<br />
know before you start using them:<br />
‣ In Autotest Preferences, you can set your tester to include and save graphs with<br />
test results.<br />
‣ The limit and worst case margin parameters are displayed at the bottom of the<br />
tabular test screen.<br />
‣ When you go to graph view, the vertical cursor is placed at the worst case<br />
margin location.<br />
3-17
Change language