X515C DF & X510C Manual - Lowrance

More documents

Recommendations

Info

3. Press ↓ or ↑ to select a setting, then press ENT. 4. To return to the previous page, press EXIT|EXIT. Alarms This unit has three different types of sonar alarms. The first is the Fish Alarm. It sounds when the Fish I.D. feature determines that an echo is a fish. Another alarm is the Zone Alarm, which consists of a bar on the side of the screen. Any echo on the chart that appears inside this bar triggers this alarm. The last alarm is the Depth Alarm, which has both a Shallow and a Deep setting. Only the bottom signal will trigger this alarm. This is useful as an anchor watch, a shallow water alert or for navigation. Depth Alarms The depth alarms sound a tone when the bottom signal goes shallower than the shallow alarm's setting or deeper than the deep alarm's setting. For example, if you set the shallow alarm to 10 feet, the alarm will sound a tone if the bottom signal is less than 10 feet. It will continue to sound until the bottom goes deeper than 10 feet. The deep alarm works just the opposite. It sounds a warning tone if the bottom depth goes deeper than the alarm's setting. Both depth alarms work only off the digital bottom depth signals. No other targets will trip these alarms. These alarms can be used at the same time or individually. Main Menu with Sonar Alarms command highlighted (left). Sonar Alarms menu (right). To adjust and turn on the shallow alarm 1. Press the ALARM key on the front of the unit or press MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press ENT. 2. Press → to SHALLOW ALARM DEPTH|ENT. 50
3. Press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and repeat until the depth is correct, then press ENT. 4. Press ← to SHALLOW ALARM ENABLED|ENT|EXIT. 5. To turn off the alarm, press ALARM|ENT|EXIT. To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in step 3 above. To adjust and turn on the deep alarm 1. . Press the ALARM key on the front of the unit or press MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press ENT. 2. Press ↓ to DEEP ALARM ENABLED|→ to DEEP ALARM DEPTH|ENT. 3. Press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and repeat until the depth is correct, then press ENT. 4. Press ← to DEEP ALARM ENABLED|ENT|EXIT. 5. To turn off the alarm, Press the ALARM key on the front of the unit or press MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press ENT. Press ↓ to DEEP ALARM ENABLED|ENT|EXIT. To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in step 3 above. Zone Alarm The zone alarm is triggered when any echo passes inside the zone alarm bar, shown on the right side of the screen. To adjust and turn on the zone alarm 1. Press the ALARM key on the front of the unit or press MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press ENT. 2. Press ↓ to ZONE ALARM ENABLED|→ to ADJUST ZONE|ENT. 51
Page 1 and 2:
www.lowrance.com Pub. 988-0151-451
Page 3 and 4:
Table of Contents Section 1: Read M
Page 5 and 6: Radar..............................
Page 7 and 8: Section 1: Read Me First! How this
Page 9 and 10: Transmitter:....................X-5
Page 11 and 12: For example, instructions for turni
Page 13 and 14: Section 2: Installation & Accessori
Page 15 and 16: oat hulls have a flat keel pad that
Page 17 and 18: sonars.) Lack of angle adjustment c
Page 19 and 20: Place the ratchets into the holes i
Page 21 and 22: Transom Transom Position transducer
Page 23 and 24: Trolling Motor Bracket Installation
Page 25 and 26: WARNING: Do not remove any material
Page 27 and 28: sure that your selected location wi
Page 29 and 30: the transom. The bottom of the brac
Page 31 and 32: The thinner branch with three wires
Page 33 and 34: Power Diagram A To unit NMEA 2000 P
Page 35 and 36: when not in use. Failure to connect
Page 37 and 38: 72.9 [2.87] 173.9 [6.85] 23.4 [0.92
Page 39 and 40: PPP-15 Portable Power Pack with tra
Page 41 and 42: Section 3: Basic Sonar Operation Th
Page 43 and 44: Main Menu. Main Menu Commands There
Page 45 and 46: • Colorline command: separates fi
Page 47 and 48: Split zoom page (left) with split f
Page 49 and 50: Basic Sonar Quick Reference 1. Depr
Page 51 and 52: You can change the sensitivity leve
Page 53 and 54: Other Free Training Aids The sonar
Page 55: Section 4: Sonar Options & Other Fe
Page 59 and 60: Sonar Alarms menu with Fish Alarm s
Page 61 and 62: Sonar Page menu with ColorLine comm
Page 63 and 64: Sonar Page menu with Depth Range co
Page 65 and 66: Fish arches Area "zoomed" Normal di
Page 67 and 68: Fig. 1A Fig. 1B Many fish arches vi
Page 69 and 70: Sonar Features menu with a frequenc
Page 71 and 72: Local Time highlighted on Overlay D
Page 73 and 74: When you boost ping speed and switc
Page 75 and 76: Screen Command (left). Screen Menu
Page 77 and 78: Sonar Menu with Sensitivity command
Page 79 and 80: Set Language selected on main menu
Page 81 and 82: Full Sonar Chart. Overlay Data (dep
Page 83 and 84: Digital Data/Chart Customizing the
Page 85 and 86: Sonar with Custom Gauges The Sonar
Page 87 and 88: Radar When you access the Radar Pag
Page 89 and 90: There are three levels of surface c
Page 91 and 92: To adjust Transparency: 1. Press ME
Page 93 and 94: The first image (left) is a full so
Page 95 and 96: Section 5: NMEA 2000 Menu NMEA 2000
Page 97 and 98: When choosing an engine-tank config
Page 99 and 100: data window will include tank size
Page 101 and 102: To Reset Calibration: Choosing the
Page 103 and 104: Configuring EP Sensors All configur
Page 105 and 106: 3. Select the fuel flow you want to
Page 107 and 108:
3. Select the desired fluid level a
Page 109 and 110:
Suzuki Engine Interface Configurati
Page 111 and 112:
NOTE: The Suzuki Engine Interface D
Page 113 and 114:
3. Select the EP-15 Fluid Level and
Page 115 and 116:
1. Press MENU| MENU, use ↓ ↑ to
Page 117 and 118:
3. Highlight CALIBRATE TRIM and pre
Page 119 and 120:
Section 6: Sonar Troubleshooting If
Page 121 and 122:
NOISE A major cause of sonar proble
Page 123 and 124:
Notes 117
Page 125 and 126:
LOWRANCE ELECTRONICS FULL ONE-YEAR
Page 127 and 128:
Accessory Ordering Information for
show all

X515C DF & X510C Manual - Lowrance

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?