X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sonar Page menu with ColorLine command selected (left).<br />
The ColorLine control bar (right).<br />
Colorline<br />
lets you distinguish between strong and weak echoes. It "paints" a<br />
brighter color on targets that are stronger than a preset value. This<br />
allows you to tell the difference between a hard and soft bottom. For<br />
example, a soft, muddy or weedy bottom returns a weaker signal which<br />
is shown with a narrow, colored line (dark blue tinged with red or a<br />
little yellow.) Since fish are among the weakest echoes, they show up<br />
mostly as blue arches. A hard bottom or other relatively hard target<br />
returns a strong signal which causes a wider brightly colored line (reddish<br />
yellow to bright yellow.)<br />
If you have two signals of equal size, one with red to yellow color and<br />
the other without, then the target with brighter color (yellow) is the<br />
stronger signal. This helps distinguish weeds from trees on the bottom,<br />
or fish from structure.<br />
ColorLine is adjustable. Experiment with your unit to find the Color-<br />
Line setting that's best for you.<br />
To adjust the Colorline level<br />
1. From the Sonar Page, press MENU|↓ to COLORLINE|ENT.<br />
2. The Colorline Control Bar appears. Press ↓ to decrease Colorline;<br />
press ↑ to increase Colorline.<br />
3. When it's set at the desired level, press EXIT.<br />
55