X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sonar Alarms menu (left) with Adjust Zone command selected.<br />
Adjust Zone Alarm selection box (right) with Upper selected.<br />
3. To set the upper boundary for the Zone Alarm, use ← or→ to select<br />
UPPER, then press ↑ or ↓ to move the top of the bar to the desired depth.<br />
4. To set the lower boundary for the Zone Alarm, use ← or→ to select<br />
LOWER, then press ↑ or ↓ to move the bottom of the bar to the desired<br />
depth.<br />
5. Press EXIT|← to ZONE ALARM ENABLED|ENT|EXIT. Now, any echo —<br />
fish, bottom, structure — within the zone alarm's depth range will trigger<br />
the zone alarm.<br />
6. To turn off the alarm Press the ALARM key on the front of the unit or<br />
press MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press<br />
ENT. Press ↓ to ZONE ALARM ENABLED|ENT|EXIT.<br />
To switch to a different depth setting, open the Sonar Alarms menu<br />
and repeat the instructions in steps 3 and 4 above.<br />
Fish Alarm<br />
Use the fish alarm for a distinctive audible alarm when fish or other<br />
suspended objects are detected by the Fish I.D. feature (Fish I.D.<br />
must be turned on for the Fish Alarm to work). a different tone sounds<br />
for each fish symbol size shown on the display.<br />
52