X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
X515C DF & X510C Manual - Lowrance
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Radar<br />
When you access the Radar Page, the screen will switch to the radar display.<br />
Information on radar installation and radar operation are included<br />
in two documents that come packed with <strong>Lowrance</strong> radar units: Radar<br />
and RIM 100 Radar Interface Module Installation Instructions and Radar<br />
Operation Instruction <strong>Manual</strong>. Refer to these documents for information<br />
on your radar unit.<br />
NOTE:<br />
Before using your radar, make sure you have checked the Enable<br />
Radar Port checkbox on the main menu.<br />
To enable Radar Port:<br />
1. From a sonar page, press MENU|MENU to access the main menu.<br />
2. Highlight ENABLE RADAR PORT and press ENT, which will place an X in<br />
the Enable Radar Port checkbox.<br />
3. Repeat Step 2 to disable the radar port, which will uncheck the<br />
checkbox. Press EXIT to return to the sonar display.<br />
To access Radar Page:<br />
1. Press PAGES, highlight the RADAR tab and press ENT.<br />
2. Press MENU to open the Radar menu. Press EXIT to return to the radar<br />
display.<br />
Radar Page (left) with Radar menu display (right).<br />
Sonar Simulator<br />
This unit has a built-in simulator that lets you run it as if you were on<br />
the water. All sonar features and functions are useable. When in simulator<br />
mode, you will see [Simulated] at the bottom of the display.<br />
81