X515C DF & X510C Manual - Lowrance

More documents

Recommendations

Info

lower engine unit can be several feet. In those cases, an inexact depth reading could result in grounding or striking underwater structure. The Keel Offset feature eliminates the need for the navigator to mentally calculate how much water is under his keel. Keel Offset lets you calibrate the digital depth: chart depth scale, chart cursor depth and fish symbol depth displayed on the screen. To calibrate the depth indicators, first measure the distance from the face of the transducer to the lowest part of the boat. In this example, we will use 3.5 feet. We enter this as a negative 3.5 feet, which makes the depth indicators perform as if the transducer's lower in the water than it really is. 1. Press MENU|MENU|↓ to SET KEEL OFFSET|ENT. 2. The Keel Offset dialog box appears. Press ↓ to change the plus (+) sign to a minus (–) sign. 3. Press → to the first number, then press ↑ to change the number to 3 4. Press → to the second number, then press ↑ to change the number to 5, then press EXIT. The depth indicators now accurately show the depth of water beneath the keel. NOTE: If knowing the exact depth of water beneath the keel is less important, you can calibrate the depth indicators so that they show the actual water depth from surface to bottom. To do this, first measure the distance from the face of the transducer up to the surface (the water line on the boat). In this example, we will use 1.5 feet. This will be entered as a positive 1.5 feet, which makes the depth indicators perform as if the transducer's higher in the water than it really is. 1. Press MENU|MENU|↓ to SET KEEL OFFSET|ENT. 2. The Keel Offset dialog box appears with a plus (+) sign at the front of the box. 3. Press → to the first number, then ↑ to change the number to 1. 4. Press → to the second number, then ↑ to change the number to 5. Press EXIT to return to the previous page. The depth indicators now accurately show the water depth from surface to bottom. Set Language This unit's menus are available in 10 languages: English, French, German, Spanish, Italian, Danish, Swedish, Russian, Dutch and Finnish. 72
Set Language selected on main menu (left). Language menu (right). To select a different language: 1. Press MENU|MENU|↓ to SET LANGUAGE|ENT. 2. Use ↓ or ↑ to select a different language and press ENT|EXIT. All menus now appear in the language you selected. Software Version Information From time to time, <strong>Lowrance</strong> updates the operating system software in some of its products. These software upgrades are usually offered to customers as free downloads from our web site, www.lowrance.com. These upgrades make the unit perform better or introduce a new feature or function. You can find out what software version is running in your sonar unit by using the Software Information command. To view software information: 1. Press MENU|MENU|↓ to SOFTWARE INFO|ENT. 2. Read the information displayed on the screen. 3. To return to the last page displayed, press EXIT|EXIT. Sonar Chart Mode The default color scheme for the sonar chart is a white background, but we offer several other options to suit your viewing preferences. You can select the chart to be displayed in Grayscale, Reverse Grayscale, Blue Background, White Background, Nightview, IceView and Bottom Color Tracking. To change the chart mode color scheme 1. From the Sonar Page, press MENU|↓ to SONAR FEATURES|ENT. 2. Press → then, ↓ to SONAR CHART MODE|ENT. 73
Page 1 and 2:
www.lowrance.com Pub. 988-0151-451
Page 3 and 4:
Table of Contents Section 1: Read M
Page 5 and 6:
Radar..............................
Page 7 and 8:
Section 1: Read Me First! How this
Page 9 and 10:
Transmitter:....................X-5
Page 11 and 12:
For example, instructions for turni
Page 13 and 14:
Section 2: Installation & Accessori
Page 15 and 16:
oat hulls have a flat keel pad that
Page 17 and 18:
sonars.) Lack of angle adjustment c
Page 19 and 20:
Place the ratchets into the holes i
Page 21 and 22:
Transom Transom Position transducer
Page 23 and 24:
Trolling Motor Bracket Installation
Page 25 and 26:
WARNING: Do not remove any material
Page 27 and 28: sure that your selected location wi
Page 29 and 30: the transom. The bottom of the brac
Page 31 and 32: The thinner branch with three wires
Page 33 and 34: Power Diagram A To unit NMEA 2000 P
Page 35 and 36: when not in use. Failure to connect
Page 37 and 38: 72.9 [2.87] 173.9 [6.85] 23.4 [0.92
Page 39 and 40: PPP-15 Portable Power Pack with tra
Page 41 and 42: Section 3: Basic Sonar Operation Th
Page 43 and 44: Main Menu. Main Menu Commands There
Page 45 and 46: • Colorline command: separates fi
Page 47 and 48: Split zoom page (left) with split f
Page 49 and 50: Basic Sonar Quick Reference 1. Depr
Page 51 and 52: You can change the sensitivity leve
Page 53 and 54: Other Free Training Aids The sonar
Page 55 and 56: Section 4: Sonar Options & Other Fe
Page 57 and 58: 3. Press ↑ or ↓ to change the f
Page 59 and 60: Sonar Alarms menu with Fish Alarm s
Page 61 and 62: Sonar Page menu with ColorLine comm
Page 63 and 64: Sonar Page menu with Depth Range co
Page 65 and 66: Fish arches Area "zoomed" Normal di
Page 67 and 68: Fig. 1A Fig. 1B Many fish arches vi
Page 69 and 70: Sonar Features menu with a frequenc
Page 71 and 72: Local Time highlighted on Overlay D
Page 73 and 74: When you boost ping speed and switc
Page 75 and 76: Screen Command (left). Screen Menu
Page 77: Sonar Menu with Sensitivity command
Page 81 and 82: Full Sonar Chart. Overlay Data (dep
Page 83 and 84: Digital Data/Chart Customizing the
Page 85 and 86: Sonar with Custom Gauges The Sonar
Page 87 and 88: Radar When you access the Radar Pag
Page 89 and 90: There are three levels of surface c
Page 91 and 92: To adjust Transparency: 1. Press ME
Page 93 and 94: The first image (left) is a full so
Page 95 and 96: Section 5: NMEA 2000 Menu NMEA 2000
Page 97 and 98: When choosing an engine-tank config
Page 99 and 100: data window will include tank size
Page 101 and 102: To Reset Calibration: Choosing the
Page 103 and 104: Configuring EP Sensors All configur
Page 105 and 106: 3. Select the fuel flow you want to
Page 107 and 108: 3. Select the desired fluid level a
Page 109 and 110: Suzuki Engine Interface Configurati
Page 111 and 112: NOTE: The Suzuki Engine Interface D
Page 113 and 114: 3. Select the EP-15 Fluid Level and
Page 115 and 116: 1. Press MENU| MENU, use ↓ ↑ to
Page 117 and 118: 3. Highlight CALIBRATE TRIM and pre
Page 119 and 120: Section 6: Sonar Troubleshooting If
Page 121 and 122: NOISE A major cause of sonar proble
Page 123 and 124: Notes 117
Page 125 and 126: LOWRANCE ELECTRONICS FULL ONE-YEAR
Page 127 and 128: Accessory Ordering Information for
show all

X515C DF & X510C Manual - Lowrance

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?