LCD Flat Panel TELEVISION Operating Guide ... - Hitachi in Canada

Timers
Set Event Timer
This function will automatically operate the LCD TV
viewing reservation of a program. If the clock is not set,
you can not use this function and the screen at right will
appear. The message on the screen will disappear after
3 seconds, then the screen automatically goes to the
clock setup mode (see page 53).
Please Set Clock First
1. Use the CURSOR PAD , to highlight EVENT 1,
EVENT 2, EVENT 3, EVENT 4 and then press the
SELECT button to select.
2. Use the CURSOR PAD , or to highlight and
select START TIME HOUR/MINUTE.
3. Use the CURSOR PAD , or to highlight and
select START TIME AM/PM.
4. Use the CURSOR PAD , or to highlight and
select FINISH TIME HOUR/MINUTE.
Timers
Set The Clock
Set Sleep Timer
Set Day/Night Timer
Set Event Timer
Move SEL Select
10 : 25 AM PST
0:30
Not Set
Not Set
5. Use the CURSOR PAD , or to highlight and
select FINISH TIME AM/PM.
6. Use the CURSOR PAD to highlight the MONTH.
7. Use the CURSOR PAD to select a MONTH or
CURSOR PAD to select DAILY, WEEKLY -
SUNDAY TO MONDAY. Use the CURSOR PAD
to return to MONTH.
8. Use the CURSOR PAD , or to highlight and
select the DAY of the MONTH.
9. Use the CURSOR PAD , or to highlight and
select the YEAR.
10. Use the CURSOR PAD , or or NUMBER
buttons to set the channel the TV will tune into.
OR
Timers
Set Event Timer
❑ Event1 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event2 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event3 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event4 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
Timers
Move
Set Event Timer
Move
SEL Return
❑ Event1 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event2 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event3 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
❑ Event4 : -- : -- AM - -- : -- AM Jan. 1 2007
Cable -------
SEL Return
On-Screen Display
11. A ✔ in the box means the Event is enabled.
NOTE: 1. When the INFO button is pressed, the Event Timer Icon will only display the current date ON/OFF timer .
2. The OFF TIMER will only activate if the TV was turned on by the ON TIMER, and any menu operations
(includes channel selection) were not made after this time. If you change the channel or operate the menu
after the ON TIMER has been activated , the OFF TIMER will deactivate.
CAUTION: Do not use your TV as a deterrent when away from home by using the ON and OFF TIMERS.
For safety, the TV should be turned off when you are away from home.
55