ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
Figure 7-5: Power Module Retention Screws<br />
Step 6: Remove the power module.Step 0:<br />
7.3.3.2 Power Module Installation<br />
To install the new power module, please follow the steps below.<br />
Step 1: Install the new power module into the system.<br />
Step 2: Reinsert the two, previously removed power module retention screws.<br />
Step 3: Reconnect the following cable connectors (See Figure 7-4):<br />
• Motherboard ATX power connector<br />
• Power socket connector<br />
Step 4: Replace the top cover. Once replaced reinsert the three previously removed<br />
retention screws. (See Figure 7-5)<br />
Step 5: Reconnect the power cable to the +12V socket<br />
Step 6: Power up the system. Step 0:<br />
147
Change language