ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
1 RED 2 GREEN<br />
3 BLUE 4 N/C<br />
5 GND 6 GND<br />
7 GND 8 GND<br />
9 VCC 10 GND<br />
11 N/C 12 DDC DAT<br />
13 HSYNC 14 VSYNC<br />
15 DDC CLK<br />
Table 3-10: VGA Connector Pinouts<br />
3.3.4 Ethernet Connectors<br />
CN Label:<br />
CN Type:<br />
LAN/USB1A and LAN/USB2A<br />
RJ-45<br />
CN Location: See Figure 3-8<br />
CN Pinouts: See Table 3-11<br />
The KINO-9452 is equipped with two built-in GbE Ethernet controllers. The controllers can<br />
connect to the LAN through two RJ-45 LAN connectors. There are two LEDs on the<br />
connector indicating the status of LAN. The pin assignments are listed in the following<br />
table:<br />
PIN DESCRIPTION PIN DESCRIPTION<br />
1 MDX0+ 5 MDX2-<br />
2 MDX0- 6 MDX1-<br />
3 MDX1+ 7 MDX3+<br />
4 MDX2+ 8 MDX3-<br />
Table 3-11: LAN1 and LAN2 Pinouts<br />
43
Change language