ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
Figure 4-7: Securing the Cooling Kit<br />
Step 4: Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each<br />
nut a few turns at a time and do not over-tighten the screws.<br />
Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector<br />
on the motherboard. Carefully route the cable and avoid heat generating chips<br />
and fan blades. (See Figure 4-8) Step 0:<br />
Figure 4-8: Connect the cooling fan cable<br />
63
Change language