ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
7.3.4 Cooling Fan Replacement<br />
To replace a cooling fan, please follow the steps below.<br />
Step 1: Turn off the system.<br />
Step 2: Remove the top cover. See Section 4.2.3.1.<br />
Step 3: Remove the fan connector cable from the motherboard (Figure 7-2).<br />
Step 4: Remove the four cooling fan retention screws from the system (Figure 7-6).<br />
Figure 7-6: Cooling Fan Retention Screws on the <strong>System</strong><br />
Step 5: Remove the fan from the fan bracket by removing the four retention screws<br />
shown in Figure 7-7.<br />
Figure 7-7: Cooling Fan Retention Screws on the Fan Bracket<br />
148<br />
IEI ® Technology, Corp.
Change language