ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
4.2.5 Cooling Kit (CF-479B-RS) Installation<br />
Figure 4-6: IEI CF-479B-RS Cooling Kit<br />
IEI provides a cooling kit designed for socket 479 CPUs. (See Figure 4-6) The<br />
cooling kit is comprised of a CPU heat sink and a cooling fan.<br />
NOTE:<br />
The CF-479B-RS heat sink comes with a sprayed layer of thermal paste.<br />
Make sure the paste is not accidentally wiped during the unpacking or<br />
installation of the heat sink. Thermal paste between the CPU and the heat<br />
sink is important for optimum heat dissipation.<br />
To install the CF-479B-RS cooling kit, please follow the steps below.<br />
Step 1: Place the cooling kit onto the CPU. Make sure the CPU cable can be<br />
properly routed when the cooling kit is installed.<br />
Step 2: Properly align the cooling kit. Make sure its four spring screw fasteners can<br />
pass through the pre-drilled holes on the PCB.<br />
Step 3: Secure the cooling kit. From the solder side of the PCB, align the support<br />
bracket to the screw threads on heat sink that were inserted through the PCB<br />
holes. (See Figure 4-7)<br />
62<br />
IEI ® Technology, Corp.