ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
ECK-3699GF Embedded System User Manual - ICP America
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ECK</strong>-<strong>3699GF</strong> <strong>Embedded</strong> <strong>System</strong><br />
module is ejected by the mechanism in the socket.Step 0:<br />
4.2.8 Install the HDD and CD Drive<br />
To install the HDD and CD drive, please follow the steps below:<br />
Step 1: Remove the top cover. See Section 4.2.3.1 above.<br />
Step 2: The HDD/CD bracket is attached to the chassis by four retention screws.<br />
Remove the four retention screws from the chassis.<br />
Step 3: Attach the HDD to the HDD/CD bracket. To do this, align the four retention screw<br />
holes in the bottom of HDD/CD bracket with the retention screw holes on the<br />
bottom of the HDD. Insert four retention screws from the topside of the bracket<br />
into the bottom of the HDD.<br />
Step 4: Attach the CD drive to the HDD/CD bracket. To do this, align the four retention<br />
screw holes in the both sides of HDD/CD bracket with the retention screw holes<br />
on the sides of the CD drive. Insert four retention screws into the sides of the CD<br />
drive.<br />
Figure 4-11: HDD and CD Drive Installation<br />
Step 5: Remove the CD drive bay from the front panel of the <strong>ECK</strong>-<strong>3699GF</strong>.<br />
66<br />
IEI ® Technology, Corp.