View - ADTRAN Support Community
View - ADTRAN Support Community
View - ADTRAN Support Community
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Example Configurations<br />
interface ppp 2<br />
ip address 65.162.109.201 255.255.255.252<br />
no shutdown<br />
cross-connect 2 t1 2/1 1 ppp 2<br />
!<br />
ip prefix-list PUBLIC-BLOCK seq 10 permit 208.61.209.0/29<br />
ip prefix-list DEFAULT seq 10 permit 0.0.0.0/0<br />
!<br />
route-map LOAD-SHARE permit 10<br />
match ip address prefix-list DEFAULT<br />
set as-path prepend 65009<br />
!<br />
router bgp 65000<br />
no auto-summary<br />
no synchronization<br />
maximum-paths 2<br />
network 208.61.209.0 mask 255.255.255.248<br />
neighbor 65.162.109.202<br />
no default-originate<br />
prefix-list PUBLIC-BLOCK out<br />
route-map LOAD-SHARE in<br />
soft-reconfiguration inbound<br />
remote-as 65002<br />
neighbor 208.61.209.253<br />
no default-originate<br />
prefix-list PUBLIC-BLOCK out<br />
route-map LOAD-SHARE in<br />
soft-reconfiguration inbound<br />
remote-as 65001<br />
!<br />
The command clock source line is enabled by default. Therefore, this command will not<br />
appear in the output when the show running-config command is issued.<br />
This configuration uses two separate T1 network interface modules (NIMs), allowing<br />
independent T1 clocking. The NetVanta dual T1 NIM (Part Number 1200872L1) does not<br />
allow independent clocking and cannot be used in applications where the T1 connections<br />
are terminated from two separate service providers.<br />
61200860L1-29.4E Copyright © 2012 <strong>ADTRAN</strong>, Inc. 45