View - ADTRAN Support Community
View - ADTRAN Support Community
View - ADTRAN Support Community
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration Command Summary<br />
Table 5. Additional BGP Configuration Options<br />
Command<br />
(config-bgp)#distance bgp <br />
<br />
(config-bgp)#bgp fast-external-failover<br />
(config-bgp)#hold-timer <br />
(config-bgp)#bgp log-neighbor-changes<br />
(config-bgp)#maximum-paths <br />
(config-bgp)#bgp [always-compare-med |<br />
compare-med | deterministic-med |<br />
ignore-med]<br />
Description<br />
Specifies the administrative distance for BGP routes learned<br />
via eBGP (external), iBGP (internal), the network command<br />
and redistributed routes (local). By default, external is set to<br />
20, internal to 200, and local to 200.<br />
Enables the fast-external-failover feature.<br />
Specifies a default hold time for all neighbors in this BGP<br />
process. This is the time interval (in seconds) within which a<br />
keepalive must be received from a peer before it is declared<br />
a dead peer.Range is 0 to 65535 seconds.<br />
Turns on the logging of BGP neighbor state changes. State<br />
change messages will appear on the screen when<br />
connected to the console.<br />
Specifies the maximum number of equal cost parallel routes<br />
(shared paths) BGP can export to the route table. Range is<br />
1 to 6.<br />
Instructs AOS on how to handle MEDs for all routes from<br />
the same AS.<br />
61200860L1-29.4E Copyright © 2012 <strong>ADTRAN</strong>, Inc. 59
Change language