View - ADTRAN Support Community
View - ADTRAN Support Community
View - ADTRAN Support Community
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration Command Summary<br />
Lists referenced in Step 2 (prefix, IPv4 ACL, AS path, and community) first must be created<br />
separately before they can be used within the route map for filtering. Refer to Route Map on<br />
page 23 for additional information on route maps and related commands used to filter<br />
routes and apply attributes.<br />
Table 8. Defining a <strong>Community</strong> Policy<br />
Command<br />
Description<br />
Step 1 (config)#ip community-list Creates a community list for a BGP route<br />
map to use. The communities defined in<br />
this command should match an existing<br />
community string that the AOS device is<br />
receiving.<br />
Step 2 (config-comm-list)#[permit | deny] [ |<br />
internet | local-as | no-advertise | no-export]<br />
Step 3<br />
Step 4<br />
Step 5<br />
(config-comm-list)#exit<br />
(config)#route-map [deny | permit]<br />
<br />
(config-route-map)#match community <br />
[exact-match]<br />
Adds an entry to the community list that<br />
either permits or denies BGP routes<br />
containing the specified community<br />
string in the community attribute.<br />
Exits the <strong>Community</strong> List Configuration<br />
mode.<br />
Creates a route map, if one does not<br />
already exist, to reference the<br />
community list.<br />
References the of the<br />
community list created in Step 1 to add it<br />
to the route map entry. The exact-match<br />
keyword is optional and specifies that the<br />
route map must match all configured<br />
community strings in the specified list<br />
exactly.<br />
Use set commands to configure any policies to be applied to the community.<br />
(config-route-map)#set as-path prepend<br />
[last-as] <br />
(config-route-map)#set metric <br />
(config-route-map)#set local-preference<br />
<br />
Prepends AS hops to the selected<br />
route(s). The last-as keyword is optional<br />
and specifies to repeat the last AS in a<br />
route up to 10 times.<br />
Specifies a MULTI_EXIT_DISC value for<br />
the selected route(s).Range is 0 to<br />
4294967295.<br />
Changes the LOCAL_PREF value for<br />
selected route(s). Range is 0 to<br />
4294967295.<br />
Step 6 (config-route-map)#exit Exits Route Map Configuration mode.<br />
Step 7 (config)#router bgp Enters BGP Configuration mode.Range<br />
is 1 to 4294967295.<br />
62 Copyright © 2012 <strong>ADTRAN</strong>, Inc. 61200860L1-29.4E