Dental unit - Takara-belmont.de

Chair part
AUTO OPERATING SWITCH ADJUSTMENT
• Preset position adjustment
1. In case the stick switch of chair auto operation (optional) is included.
1. Operate by the stick switch of chair manual operation to set up chair height and reclining
angle of backrest.
2. Upon deciding of the desired direction 0, keep pressing the stick switch of chair auto
operation until buzzer sounds. ( in about 5 seconds).
3. Release the stick switch if the buzzer sounds for setting completion.
2. Please setup by the Operating panel switch (membrane switch) of doctor table if the Stick switch
of chair auto operation is not optional.
1. Operate by the stick switch of chair manual operation to set up chair height and reclining angle
of backrest.
The chair manual switch in doctor table operating panel is also available.)
2. Keep pressing the stick switch of doctor table operating switch until buzzer sounds. (in
about 5 seconds).
3. Release the stick switch if the buzzer sounds for setting completion.
• Mouth Rinsing Position Adjustment
1. In case the stick switch of chair auto operation (optional) is included.
1. Operate by the stick switch of chair manual operation to set up chair height and reclining
angle of backrest.
2. Upon deciding of the desired direction , keep pressing the stick switch of chair auto
operation until buzzer sounds. (in about 5 seconds).
3. Release the stick switch if the buzzer sounds for setting completion.
2. Please setup by the Operating panel switch (membrane switch) of doctor table if the Stick switch
of chair auto operation is not optional.
1. Operate by the stick switch of chair manual operation to set up chair height and reclining
angle of backrest.
(The chair manual switch in doctor table operating panel is also available.)
2. Upon deciding of the desired direction LP, keep pressing the stick switch of chair auto
operation until buzzer sounds. (in about 5 seconds).
3. Release the stick switch if the buzzer sounds for setting completion.
15