Dental unit - Takara-belmont.de

Unit part
OPERATING INSTRUCTIONS
Doctor’s unit
• Table elevating/lowering
▪ When the table is moved up, it is fixed at that
position.
▪ When moving the table down, move it up to the
highest position and then move it down.
WARNING
Do not place objects weighing more than 3 kg on
the table.
This could cause damage to the table, defective
function or accidents.
• Table safety switch
Safety switch is
activated.
Safety switch is activated.
Safety switch
Release
Safety switch is released.
▪ The Doctor’s table has a safety switch to prevent
breakage due to interference with the chair and
ensure the safety of the patient.
▪ Automatic operation of the chair is prohibited
when the Doctor’s table is at the backrest or a
position subject to interference with the patient.
When the table is pressed up from below,
automatic operation of the chair is prohibited and
the safety function activates to allow downward
and lay-down manual operations only.
An error is displayed on the indicator when the
safety function is active.
In addition, it is also shown with the LED
indicator (optional). See page 37 for details.
▪ Before moving the chair in automatic operation,
move the arm to a position free from interference
with the chair and reset the safety switch.
• Panorama viewer (optional)
▪ When the switch is turned up, the screen goes on.
When it is turned down, the screen goes out.
▪ When the brightness adjust dial is rotated
upward, the screen becomes brighter. When it is
rotated downward, the screen becomes darker.
Switch
NOTICE
Turn off the viewer when it is not in use.
Brightness adjust dial
33