Dental unit - Takara-belmont.de

More documents

Recommendations

Info

Unit part OPERATION SETTING Automatic operation settings of chair * Refer to the manual of the Chair part. • Presetting 1. Move the chair to the intended examination position with the manual switch. Manual switch 2. Hold the preset switch or for approximately 5 seconds when the examination position is determined. The buzzer of the chair generates a “beep” sound and the setting is completed. 3. Carry out operations 1 and 2 indicated above to change the set position. Preset switch • Setting of last position 1. Move the chair to the intended examination position with the manual switch. Manual switch 2. Hold the last position switch for approximately 5 seconds when the gargle position is determined. The buzzer of the chair generates a “beep” sound and the setting is completed. 3. Carry out operations 1 and 2 indicated above to change the set position. Last position switch • Setting of patient’s up-and-down position 1. Move the chair to the intended examination position with the manual switch. Automatic chair return switch 2. Hold the automatic chair return switch for approximately 5 seconds when the patient getting off position is determined. The buzzer of the chair generates a “beep” sound and the setting is completed. 48 3. Carry out operations 1 and 2 indicated above to change the set position.
Unit part OPERATION SETTING Function switch • Settings and sequence of function switch Function switch ▪ Intended setting is enabled by selecting the Function switch on the indicator. The setting details and order are as shown below. (i) Selection and operation of flush-out (ii) Setting of cup filler Flush-out Cup Water feeding Setting (iii) On/Off setting for interlocking operation between the cup filler and the bowl rinse Selector switch (iv) On/Off setting of beeping sound Enter switch (v) Selection of the timing of lighting of the handpiece light (vi) Change-over of spray mode 49
Page 1 and 2: DENTAL UNIT AND CHAIR CP-ONE PLUS O
Page 3 and 4: ‣ Intended Use of the Product Thi
Page 5 and 6: SAFETY PRECAUTIONS General • Befo
Page 7 and 8: General 7. Precautions when using w
Page 9 and 10: General SAFETY PRECAUTIONS 1. Troub
Page 11 and 12: Chair part SAFETY PRECAUTIONS • C
Page 13 and 14: Chair part OPERATING INSTRUCTIONS
Page 15 and 16: Chair part OPERATING INSTRUCTIONS (
Page 17 and 18: Chair part SAFETY SWITCH • Safety
Page 19 and 20: Chair part AUTO OPERATING SWITCH AD
Page 21 and 22: Chair part POSITIONING RELATION OF
Page 23 and 24: Unit part PRACTICE OF FLUSH-OUT Pre
Page 25 and 26: Unit part OVERALL VIEW AND MAJOR CO
Page 27 and 28: Unit part OPERATING INSTRUCTIONS Do
Page 45 and 46: Unit part OPERATING INSTRUCTIONS Cu
Page 51: Unit part Operation and functions o
Page 55 and 56: Unit part OPERATION SETTING Functio
Page 57 and 58: Unit part OPERATION SETTING Functio
Page 59 and 60: Unit part OPERATION SETTING Setting
Page 61 and 62: Unit part OPERATION SETTING Setting
Page 63 and 64: Unit part OPERATION STOPPING FUNCTI
Page 65 and 66: Unit part ADJUSTMENT OF PARTS Cuspi
Page 67 and 68: Unit part CLEANING Cuspidor unit
Page 69 and 70: Unit part CLEANING Cuspidor unit
Page 71 and 72: Unit part CLEANING Doctor’s unit
Page 73 and 74: Unit part CLEANING Doctor’s unit
Page 75 and 76: SPECIFICATIONS Unit part • Base m
Page 77 and 78: Unit part BEFORE REQUESTING REPAIR
Page 79 and 80: CARE AND MAINTANANCE Others • •
Page 81 and 82: Others ELECTROMAGNETIC COMPATIBILIT
Page 83 and 84: Others EMC INFORMATION Recommended

Dental unit - Takara-belmont.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?