Dental unit - Takara-belmont.de

Unit part
ADJUSTMENT OF PARTS
Cuspidor unit
• Pressure adjustment of the water tank (optional)
Increase
Knob
Decrease
Lock nut
Pressure gauge
“2” of the inner red scale corresponds to
200 kPa.
▪ Adjust the pressure of air to be supplied to the
water tank.
▪ Loosen the lock nut and turn the knob as shown
in the drawing so that the pressure is lowered
below 200 kPa.
▪ Be sure to tighten the lock nut after completion
of the setting.
▪ This knob is adjusted when installing the unit. Do
not change the setting under normal conditions.
CAUTION
If the pressure exceeds 400 kPa, the water tank
may break. Set the pressure below 200 kPa for
safety.
CLEANING
Cuspidor unit
• Information about replacing water cleaning filter
Water cleaning filter
(consumable)
Record of filter replacement
Date of delivery:
Date of
replacement
Date of
replacement
Date of
replacement
Replace the filter every 9 to
12 months.
▪ The water filtration capability of the water
cleaning filter (consumable) is lowered as the
handpiece is used and water feeding into cups is
executed.
▪ The standard interval of replacing the water
cleaning filter is 9 to 12 months.
▪ The filter replacement record sticker shown on
the left is stuck in the lower part of the
maintenance cover on the left of the Cuspidor
unit. Check the replacement period and replace
the water cleaning filter as necessary.
▪ Ask the dealer or our company to replace the
water cleaning filter. The filter will be replaced
for a fee.
62