You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Unit part<br />
OPERATION SETTING<br />
Automatic operation settings of chair<br />
* Refer to the manual of the Chair part.<br />
• Presetting<br />
1. Move the chair to the inten<strong>de</strong>d examination<br />
position with the manual switch.<br />
Manual switch<br />
2. Hold the preset switch or for<br />
approximately 5 seconds when the<br />
examination position is <strong>de</strong>termined. The<br />
buzzer of the chair generates a “beep” sound<br />
and the setting is completed.<br />
3. Carry out operations 1 and 2 indicated above<br />
to change the set position.<br />
Preset switch<br />
• Setting of last position<br />
1. Move the chair to the inten<strong>de</strong>d examination<br />
position with the manual switch.<br />
Manual switch<br />
2. Hold the last position switch for<br />
approximately 5 seconds when the gargle<br />
position is <strong>de</strong>termined. The buzzer of the chair<br />
generates a “beep” sound and the setting is<br />
completed.<br />
3. Carry out operations 1 and 2 indicated above<br />
to change the set position.<br />
Last position switch<br />
• Setting of patient’s up-and-down position<br />
1. Move the chair to the inten<strong>de</strong>d examination<br />
position with the manual switch.<br />
Automatic chair return switch<br />
2. Hold the automatic chair return switch<br />
for approximately 5 seconds when the patient<br />
getting off position is <strong>de</strong>termined. The buzzer<br />
of the chair generates a “beep” sound and the<br />
setting is completed.<br />
48<br />
3. Carry out operations 1 and 2 indicated above<br />
to change the set position.