You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Unit part<br />
OPERATION SETTING<br />
Function switch<br />
Flush-out<br />
The number of HP picked<br />
up is shown.<br />
Flush-out<br />
(i) Selection and operation of flush-out<br />
▪ Two cleaning methods can be selected.<br />
[Operation procedures]<br />
When cleaning water circuit of handpiece only<br />
1. Select Flush-out from the functions.<br />
2. Select HP and press .<br />
3. Remove the handpiece to be cleaned and set it on the<br />
spittoon bowl, etc.<br />
4. Step on the foot controller pedal. Water flows from the<br />
handpiece for 40 seconds when you release the pedal.<br />
HP setting<br />
Startfoot pedal<br />
Flush-out<br />
Flush-out<br />
HP setting<br />
Startfoot pedal<br />
When cleaning cup water feed and spittoon bowl after<br />
cleaning handpiece<br />
1. Select Flush-out from the functions.<br />
2. Select HP + and press .<br />
3. Remove the handpiece to be cleaned and set it on the<br />
spittoon bowl, etc.<br />
4. Step on the foot controller pedal. Water flows from the<br />
handpiece for 5 minutes when you release the pedal.<br />
After cleaning the handpiece, water keeps on flowing<br />
for 5 minutes from both the cup water feeding and<br />
bowl washing nozzles to clean the spittoon bowl.<br />
* Press any switch or step on the foot controller pedal to<br />
stop flush-out operation halfway.<br />
Water feed<br />
nozzle<br />
Spittoon bowl<br />
Bowl rinse nozzle<br />
Pedal<br />
50