Dental unit - Takara-belmont.de

Unit part
OPERATING INSTRUCTIONS
Doctor’s unit
Spray on/off switch
▪ This is the switch for turning on and off
handpiece cooling spray.
When the handpiece is picked up and this switch
is pressed, the LED on the A side (air) or W side
(water) goes on, indicating the selected function.
▪ If the electric scaler is used, only the water
(W-side LED) goes on or off, regardless of the
mode, when this switch is pressed.
▪ 2-mode operation and 4-mode operation can be
selected by mode change-over setting.
▪ When this switch is pressed in 2-mode operation,
spray ON/OFF is changed.
▪ In 4-mode operation, spray ON/OFF, water only
and air only are changed when this switch is
pressed.
▪ See (vi) on page 44 for mode change-over
setting.
When handpiece light is "On"
(LED lamp is lit in green.)
Handpiece light switch
▪ This switch turns On and Off the handpiece light.
Every press of the switch alternates between On
and Off.
See (v) on page 44 for lighting timing setting.
Doctor’s unit
To rotate in reverse
(Only left LED lamp is lit in
orange.)
◆◆◆
To rotate forward
(Only right LED lamp is lit in
green)
Micromotor forward/reverse switch
▪ This switch changes the rotational direction of
the micromotor. Every press of the switch
changes the forward (clockwise) rotation and
reverse (counterclockwise) rotation.
Immediately after the main switch is turned on,
forward rotation is selected.
* The rotational direction cannot be switched
during rotation of the micromotor. Use the
switch after the micromotor stops.
31