Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unit part<br />
OPERATION SETTING<br />
Change-over of turbine mo<strong>de</strong><br />
2-mo<strong>de</strong> turbine<br />
HI/LOW turbine mo<strong>de</strong> only<br />
4-mo<strong>de</strong> turbine<br />
HI/LOW, STD and LL turbine mo<strong>de</strong>s<br />
[Setting procedures]<br />
1. Pick the turbine up from the hol<strong>de</strong>r.<br />
2. Press the page feed button and select .<br />
3. Select “Change turbine mo<strong>de</strong>” and press to<br />
<strong>de</strong>termine.<br />
4. Select inten<strong>de</strong>d setting with or and<br />
press to save.<br />
Change turbine mo<strong>de</strong><br />
Default mo<strong>de</strong> memory<br />
2-mo<strong>de</strong> 4-mo<strong>de</strong><br />
Change turbine mo<strong>de</strong><br />
2-mo<strong>de</strong><br />
Default mo<strong>de</strong> memory<br />
Default mo<strong>de</strong> memory<br />
The current setting may be set as the <strong>de</strong>fault of the<br />
turbine.<br />
[Setting procedures]<br />
1. Pick the turbine up from the hol<strong>de</strong>r.<br />
2. Press the page feed button and select .<br />
3. Select “Default mo<strong>de</strong> memory” and press to<br />
<strong>de</strong>termine.<br />
4. Check setting and press to save.<br />
* The <strong>de</strong>fault mo<strong>de</strong> of the scaler may also be set.<br />
Indicator<br />
• Fault display and possible solutions for the indicator<br />
▪ Abnormal display may be given on the indicator due to influences of noise.<br />
Turn off the main switch and turn it on again approximately 5 seconds later in such a case.<br />
* Abnormal conditions may not be reset if noise influences continue.<br />
Eliminate the cause of noise and turn on power again.<br />
Contact the <strong>de</strong>aler or our company if the cause of noise is unknown.<br />
58
Change language