Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unit part<br />
OPERATION SETTING<br />
Setting of the quantity of water injected by the micromotor<br />
▪ The water feeding quantity in each stage may be set<br />
(in the 01 to 99 range). The value D shows the initial<br />
value set before shipment.<br />
▪ Setting of each handpiece may be stored.<br />
[Setting procedures]<br />
1. Pick the micromotor up from the hol<strong>de</strong>r.<br />
2. Press the page feed button and select .<br />
3. Select<br />
and press<br />
to <strong>de</strong>termine.<br />
4. Select inten<strong>de</strong>d setting with or and<br />
press to save.<br />
▪ Water feed quantities of the turbine and scaler may<br />
also be set in the same manner.<br />
Setting<br />
Setting<br />
CAUTION<br />
The water feeding quantity differs with the main<br />
pressures of water and air, different equipment and<br />
the water feed characteristics of the contra-angle<br />
handpiece. Pay attention to influences upon the <strong>de</strong>ntal<br />
pulp when grinding.<br />
01-99<br />
Setting<br />
99<br />
57