Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unit part<br />
OPERATION SETTING<br />
Function switch<br />
Precautions for setting water feeding quantity<br />
▪ Carry out setting in a condition where water comes out of the water feed nozzle normally. Water may not<br />
be fed as set if setting is carried out in a condition where water contains air, etc.<br />
▪ If is pressed during setting, setting done till that time is invalidated and the initial status<br />
immediately after starting setting is restored. (The buzzer sound changes to “beep, beep”.)<br />
▪ The water feeding quantity may be less than the set quantity, if “Cup/linked with bowl” is used.<br />
▪ If the flow rate (water pressure) of water in use changes after setting, the water feeding quantity may<br />
change.<br />
* If the cup water feed control valve is adjusted, the flow rate changes and accordingly the water feeding<br />
quantity may change.<br />
▪ Set the quantity so that the total weight of the cup and water is 200 g or less.<br />
(Reference) Paper cup for <strong>de</strong>ntal use (approximately 3.5 g): The quantity may be set to a cup of water.<br />
Stainless steel cup for <strong>de</strong>ntal use (approximately 60 g): The quantity may be set to approx. 80% of the<br />
cup (approximately 140 cc).<br />
* Water may not be fed as set if the total weight exceeds 200 g.<br />
▪ Be sure to set the water feeding quantity, if the type of cup to be used is changed (e.g., paper cup is<br />
changed to stainless steel cup).<br />
▪ Be sure to set the water feeding quantity, if the flow rate of feed water is changed with the cup water<br />
feed adjustment knob.<br />
▪ An error may occur and the buzzer near the cup table may sound after setting, if the water feeding<br />
quantity is not set properly. Retry the setting of the water feeding quantity from the beginning, if the<br />
buzzer sounds.<br />
▪ Set the water feed time between 1 and 12 seconds. If the water feed time is less than 1 second, an error<br />
may occur and the buzzer may sound after completion of setting. Retry the setting of the water feeding<br />
quantity from the beginning, if the buzzer sounds. Water feeding is disabled and the water feed time is<br />
set to 12 seconds, if the water feed time exceeds 12 seconds during setting.<br />
▪ Set the water feeding quantity over 20 cc. The buzzer may sound after setting if the water feeding<br />
quantity is less than 20 cc. Retry the setting of the water feeding quantity from the beginning, if the<br />
buzzer sounds.<br />
LinkSingle<br />
Cup/linked with bowl<br />
Link<br />
(iii) On/Off setting for interlocking operation<br />
between the cup filler and the bowl rinse<br />
Non-link mo<strong>de</strong><br />
The spittoon bowl is not cleaned when cup<br />
water feeding starts.<br />
Link mo<strong>de</strong><br />
The spittoon bowl is cleaned as soon as cup water<br />
feeding starts.<br />
[Setting procedures]<br />
1. Select “Cup/linked with bowl” from the functions.<br />
2. Select inten<strong>de</strong>d setting with or and press<br />
to save.<br />
52
Change language