Operations Manual - PRO-111FD - Pioneer
Operations Manual - PRO-111FD - Pioneer
Operations Manual - PRO-111FD - Pioneer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
06 Helpful Information<br />
If the information above fails to solve the issue, please contact a <strong>Pioneer</strong>-authorized service representative. Do<br />
not attempt to service the panel yourself. Opening or removing covers exposes you to possible electrical shock<br />
and other dangers as well as possibly voiding your warranty. Request a qualified service professional to check you<br />
flat panel TV.<br />
Some situations that require a service professional are as follows:<br />
• panel dropped or damaged<br />
• power cord or plug damaged<br />
• liquid spilled or an object dropped into the panel<br />
• exposed to rain or water<br />
• noticeable abnormality in panel operation<br />
Occasionally a part within the flat panel TV may fail. Verify that your service professional uses only replacement<br />
parts specified by <strong>Pioneer</strong> or by those with the same characteristics and performance as the original parts. Use<br />
of unauthorized parts can result in fire, electric shock, or other danger. Upon completion of any service or repair<br />
work, request that the service professional perform safety checks to ensure that the product is operating properly.<br />
If you need more assistance or have a Service/Parts-related question, please contact the <strong>Pioneer</strong> Service<br />
organization at (800) 421-1625.<br />
6.4.1 Check the Signal Strength<br />
When the flat panel TV has a UHF/VHF antenna connected, the signal may be weak. If the image or sound is<br />
unclear, check the strength of the signal. Follow the steps below to check a channel’s signal strength.<br />
1 ) Tune to the channel that is fuzzy or with unclear sound.<br />
2 ) Access the System Setup through the Setup.<br />
3 ) Select Digital Tuner Setup from the System Setup menu.<br />
4 ) Select Installation from the Digital Tuner Setup menu.<br />
5 ) Select Signal Check from the submenu.<br />
6 ) Select RF Channel.<br />
To add the channel(s), select Add.<br />
7 ) Select the channel to be checked.<br />
8 ) Adjust the direction of the antenna until the current signal strength reaches as close to the maximum signal<br />
strength as possible.<br />
RF Channel : 21<br />
Add<br />
Level : 60%<br />
Quality : 80%<br />
9 ) Press HOME MENU to exit the menu.<br />
130<br />
En
Change language