Operations Manual - PRO-111FD - Pioneer

More documents

Recommendations

Info

05 Use Other Equipment With Your Flat Panel TV 5.3.4 Add an AV Amp or a BD Player To add an AV amp and/or a BD Player, refer to the appropriate cabling diagram below. AV Amp & BD Player T T T T W W W W Rear view Rear view HDMI compliant cable (HDMI cable having the HDMI mark) AV cable (commercially available) Optical digital cable (commercially available) HDMI compliant cable (HDMI cable having the HDMI mark) AV cable (commercially available) Optical digital cable (commercially available) AV amp BD player AV amp BD player BD Player only T W T W Rear view HDMI compliant cable (HDMI cable having the HDMI mark) BD player 90 En
Use Other Equipment With Your Flat Panel TV 05 5.4 Specific HDMI Control Commands When using HDMI equipment with your flat panel TV, some options include when to power the panel and ways to turn other devices or features On and Off. This section provides steps for commonly desirable setting changes. 5.4.1 Play Source Sound Using an HDMI Command When sound is coming from a <strong>Pioneer</strong> AV System through the flat panel TV, placing the panel in Standby causes the sound to stop. To have the sound continue when the flat panel TV turns On, follow the steps below. 1 ) Access the Option through the Setup. 2 ) Select HDMI Control Setting from the Option menu. 3 ) Select Hold Sound Status from the submenu. 4 ) Select On to allow sound from an AV System to play when the panel turns On. 5 ) Press HOME MENU to exit the menu. Note: To have the sound continue when the flat panel TV turns On, confirm that the Switch to TV Sound option appears on the HDMI Control menu before turning the panel Off (see page 87). 5.4.2 Turn OFF the Power With an HDMI Command The “Power Off Control” function is valid for the devices connected to any of the panel’s HDMI ports. To power off a connected device when the flat panel TV is turned Off, follow the steps below. 1 ) Access the Option through the Setup. 2 ) Select HDMI Control Setting from the Option menu. 3 ) Select Power Off Control from the submenu. 4 ) Select On to allow the panel to power off the connected equipment. 5 ) Press HOME MENU to exit the menu. 5.4.3 Turn ON the Power With an HDMI Command The panel ships from the factory with the Power On command activated. If this feature is turned off in error, it can be reactivated. To power on the flat panel TV automatically when a connected <strong>Pioneer</strong> recorder or player is turned On and images are sent to the panel, follow the steps below. 1 ) Access the Option through the Setup. 2 ) Select HDMI Control Setting from the Option menu. 3 ) Select Power-On Ready from the submenu. 4 ) Select On to have another device power-on the panel. 5 ) Press HOME MENU to exit the menu. 91 En
Page 2 and 3:
IMPORTANT The lightning flash with
Page 4 and 5:
TABLE OF CONTENTS 4 En 3.5.2 Activa
Page 6 and 7:
01 Introduction to the ELITE Series
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
02 Install Your Flat Panel TV 2 Ins
Page 16 and 17:
02 Install Your Flat Panel TV 2.2 I
Page 18 and 19:
02 Install Your Flat Panel TV Attac
Page 20 and 21:
02 Install Your Flat Panel TV (PRO-
Page 22 and 23:
02 Install Your Flat Panel TV 8 ) I
Page 24 and 25:
02 Install Your Flat Panel TV A com
Page 26 and 27:
02 Install Your Flat Panel TV 2.5 A
Page 28 and 29:
02 Install Your Flat Panel TV (when
Page 30 and 31:
02 Install Your Flat Panel TV Conne
Page 32 and 33:
T W T W 02 Install Your Flat Panel
Page 34 and 35:
03 Basic Operations For Television
Page 36 and 37:
Page 38 and 39:
Page 40 and 41: 03 Basic Operations For Television
Page 58 and 59: 04 Additional Picture and Sound Adj
Page 78 and 79: TV 1 5 PC TV CBL DVD DVR VOL 05 Use
Page 80 and 81: 05 Use Other Equipment With Your Fl
Page 124 and 125: 06 Helpful Information Why is the p
Page 126 and 127: 06 Helpful Information Picture/Soun
Page 128 and 129: 06 Helpful Information Home Media G
Page 130 and 131: 06 Helpful Information If the infor
Page 132 and 133: 07 Cautions and Warnings • View f
Page 134 and 135: 07 Cautions and Warnings 7.7 Safety
Page 136 and 137: 08 Appendix 8 Appendix 8.1 Ratings
Page 138 and 139: 08 Appendix 8.2 Manufacturer Codes
Page 140 and 141:
08 Appendix 8.2.4 VCR (Brands G - O
Page 142 and 143:
08 Appendix 8.2.7 PVR Brand/Code Br
Page 144 and 145:
08 Appendix 8.2.11 DVD (Brands O -
Page 146 and 147:
08 Appendix Terminals - Rear ANT IN
Page 148 and 149:
08 Appendix 1. Redistributions of s
Page 150 and 151:
08 Appendix libpng versions 0.5, Ma
Page 152 and 153:
08 Appendix HEREUNDER IS ON AN “A
Page 154 and 155:
08 Appendix Program), you indicate
Page 156 and 157:
08 Appendix 156 En Preamble The lic
Page 158 and 159:
08 Appendix 158 En ordinary GNU Gen
Page 160 and 161:
08 Appendix Each version is given a
Page 162 and 163:
08 Appendix 8.4 Glossary HDMI The H
Page 164 and 165:
08 Appendix 164 En 8.5 Index Numeri
Page 166 and 167:
Should this product require service
show all

Operations Manual - PRO-111FD - Pioneer

Create successful ePaper yourself

Delete template?

Save as template?