community and continuing professional education - Rock Valley ...

64
CONTINUING PROFESSIONAL EDUCATION
www.rockvalleycollege.edu/cpe Fall 2011
MANUFACTURING/ INDUSTRIAL WORKFORCE TRAINING
CNC Skills Training for
Machine Tooling - Online
MasterTask Online Training for CNC
Machines www.Mastertask.com
Rock Valley College in partnership with MasterTask is offering
on-line training for manufacturing environments. The MasterTask
100% solution provides a systematic approach that is easy to use to
achieve “lean” goals. Reports show it will develop new people in less
time to higher levels of performance and cut costs by improving existing
personnel creating faster setups, higher quality, longer tool life,
fewer crashes, less machinery repair, and better employee attitudes.
Simulation-based CNC courses: By selecting from popular models
of Fanuc, Haas, Mazak or Okuma CNC controls, you’ll learn both the
basics and the specifics of your machinery. You practice on realistic
computer simulations of your CNC Turning Centers, CNC Lathes, and
CNC Machining Centers without tying up production machinery or
other operators, and if you make a mistake, you won’t have scrap,
damaged tools or downtime.
Courses are offered in an open-entry format – students have one
year to complete all modules in each of the three courses. The course
manual will be mailed to you once your registration is received. For
more information on course content or to set up an optional hands-on,
open lab practice time, call Stan McCord, (815) 921-3064.
Once you register, you will be contacted with your password and
instructions. For complete course outline, course simulations, etc, visit
www.Mastertask.com. Call (815) 921-3900 to register/pay for your
class and provide us with your e-mail address.
Precision Measurement for Machinists -
(Modules 1-47)
(2.5 Credits) Powerful simulations allow students to learn how to
measure with accuracy on 35 instruments from steel rulers to CMMs.
Students may choose inch, metric or both systems of measurement
when registering for this course. 47 instructional modules cover everything
from shop math, print reading, and Geometric Dimensioning and
Tolerance. Course manual included.
Cost: $199
Call (815) 921-3900 to register – refer to Course# AUT 026 INT
Mastering CNC Machining Centers - (Units 1-5)
(2.5 Credits) In addition to the basics, students learn from simulations
of the job tasks on the popular models of Fanuc, Haas, Okuma,
and Mazak CNC controls. Cut costs for your local shops by improving
existing machinists or develop new setup operators to higher levels of
skill with this proven courseware. 141 instructional sections to select
from provide both Core concepts and Specific Instruction on the most
common CNC control models. Students can learn both G code and
conversational programming. Course manual included.
Cost: $199
Call (815) 921-3900 to register refer to Course# AUT 027 INT
Mastering CNC Lathes - (Units 1-5)
(2.5 Credits) In addition to the basics, students learn from simulations
of the job tasks on the popular models of Fanuc, Haas, Okuma,
or Mazak CNC controls. Cut costs for your local shops by improving
existing machinists or develop new setup operators to higher levels of
skill with this proven courseware. 106 instructional modules to select
from provide both Core concepts and Specific Instruction on the most
common CNC control models, with more on the way. Students learn
both G code and conversational programming techniques. Course
manual included.
Cost: $199
Call (815) 921-3900 to register refer to Course# AUT 028 INT
Industrial Blueprint Reading & Precision
Measuring Instruments
(1 Credit) This workshop will give an understanding of reading blueprints
and measuring instruments. A training workbook and various
instructional and problem-solving materials are included. You will
learn: fundamentals required to interpret industrial, drawings for dimensions,
tolerances, to view relationships, sections, surface texture
and other pertinent data, basic math review, drawing interpretation
and multi-view projection. Purchase text at RVC Bookstore.
• Course #: TEC 034 RV
Reg Code: 7208 9/20-10/11
Tuesdays, 5:30-9:30 pm
4 Sessions
RVC STENSTROM CTR Room 337
James Orr $135
Geometric Dimensioning and
Tolerancing (GD and T)
(1 Credit) For engineers, managers, designers, CAD/draft persons, supervisors,
quality control and other industrial personnel who are involved with
the origination or interpretation of industrial drawings. You will learn:
fundamental concepts, datums, form, orientation, runout, profile and location
tolerances, principle changes from 2009 STD. Prerequisite: Blueprint
Reading or consent of instructor. Purchase text at RVC Bookstore.
• Course #: TEC 036 RV
Reg Code: 7209 10/18-11/8
Tuesdays, 5:30-9:30 pm
4 Sessions
RVC STENSTROM CTR Room 169
James Orr $135
Integrated Systems
Technology Program
What is Integrated Systems Technology? The IST program cross-trains
individuals in electrical, electronic and mechanical systems. Students
acquire entry-level knowledge of operating, troubleshooting and
maintaining the high-tech equipment found in today’s manufacturing
environments. Topics covered include electricity, programmable logic
controllers (PLC), pneumatics, hydraulics and mechanical systems. This
approach allows students to develop skills in multiple areas, rather
than one specific skill. For more information on the IST program, call
John Jamont at (815) 921-3026.
Introduction to Electrical Control Circuits
(3 Credits) This course is intended for individuals who require
fundamental electrical knowledge for job tasks such as equipment
maintenance, engineering support, electrical equipment assembly or
technical writing. Topics studied include: fundamentals of electricity;
Basic electrical circuits; Ohm’s Law; Input and output devices; taking
electrical measurements; Series; Parallel and combination circuits.
Purchase text at RVC Bookstore. No class 11/21.
• Course #: IST 003 RV
Reg Code: 7514 9/12-12/12
Mondays, 5:30-9:00 pm
13 Weeks
RVC STENSTROM CENTER Room 437
TBA $286
Electrical Control Circuits II
(3 Credits) This course is a continuation of IST 003. Topics include:
control transformers, ladder logic, on/off delay timers, motor control
and overload protection. PREREQUISITE: IST 003 or consent of instructor.
Purchase text at RVC Bookstore. No class 11/24.
• Course #: IST 004 RV
Reg Code: 7515 9/15-12/15
Thursdays, 5:30-9:15 pm
13 Weeks
RVC STENSTROM CENTER Room 437
TBA $286
Introduction to Programming the Allen-Bradley
SLC 500 Series Programmable Logic Controller
(PLC)
(3 Credits) This class familiarizes a student with the purpose of PLC’s
and how they operate. Topics of coverage include interfacing input/
output devices, understanding relay ladder logic diagrams, development
of programs and troubleshooting. PREREQUISITE: IST 004 or
consent of instructor. Purchase text at RVC Bookstore. No class 11/23.
• Course #: IST 006 RV
Reg Code: 7519 9/14-12/14
Wednesdays, 5:30-9:00 pm
13 Weeks
RVC STENSTROM CENTER Room 441
TBA $286
Hydraulics for the Integrated
Systems Technologist
(3 Credits) This class is intended for individuals requiring an understanding
of hydraulic components and systems. Topics studied include
Pascal’s Law, schematic symbols, flow control valves, directional
control values, single/double acting cylinders, motors and pumps. No
prerequisites. Purchase text at RVC Bookstore. No class 11/25
• Course #: IST 012 RV
Reg Code: 7520 9/16-12/16
Friday, 5:30-9:00 pm
13 Weeks
RVC STENSTROM CTR Room 437
TBA $286
Intro to Mechanical Drive Systems
(3 Credits) This course acquaints students with the procedures
necessary to install and align mechanical assemblies used to transmit
power. Students will understand the fundamentals of chain drive
systems, spur gear drive systems, belt drive systems and the importance
of proper alignment of components utilized in mechanical drive
systems. Purchase text at RVC Bookstore. No class 11/23.
• Course #: IST 015 RV
Reg Code: 7521 9/14-12/14
Wednesday, 5:30-9:15 pm
13 Weeks
RVC STENSTROM CENTER Room 443
Stan Lipowski $286
Welding Program
For more information on the Welding Program, call Mike Merriman at
(815) 921-3010.
Welding for Beginners
(2.5 Credits) This hands-on course is designed for beginning welders
as an introduction to welding and cutting including theory, set up and
operation of Shielded Metal Arc Welding (SMA W/stick), MIG (wire),
TIG (heli-arc), Plasma cutting, Oxyfuel cutting (OFC), equipment and
shop safety. (Special safety gear required and a material fee of $75 is
included in the tuition.) No class 11/26.
• Course #: IST 091 RV
Reg Code: 7523 9/24-11/12
Saturday, 8:00 am-12:30 pm
8 Sessions
RVC STENSTROM CENTER Room 436
Larry Clevenger $299
• Course #: IST 091 RV2
Reg Code: 7524 10/8-12/3
Saturday, 12:30-5:00 pm
8 Sessions
RVC STENSTROM CENTER Room 436
TBA $299