WL76* Digital Series YL76* Digital Series - Toshiba-OM.net
WL76* Digital Series YL76* Digital Series - Toshiba-OM.net
WL76* Digital Series YL76* Digital Series - Toshiba-OM.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONTROLS AND FEATURES<br />
The television can be set to turn itself Off after a certain length<br />
of time.<br />
a<br />
b<br />
c<br />
In the APPLICATIONS menu, press b to select Sleep<br />
Timer. Use the number buttons to set the desired time.<br />
For example, to switch the television off in one and a<br />
half hours enter 01:30, or press c/C to increase/<br />
decrease in steps of 10 minutes. (Maximum time<br />
setting is 12 hours)<br />
Press EXIT to finish.<br />
Sleep Timer<br />
To cancel the Sleep Timer, enter all zeros for the<br />
above setting.<br />
Energy Saving Settings<br />
The TV will automatically turn itself off (standby) after 4 hours,<br />
if you do not operate the TV either from the remote control or<br />
the TV control panel.<br />
a<br />
b<br />
c<br />
Automatic Power Down<br />
In the PREFERENCES menu, highlight Energy Saving<br />
Settings and press OK.<br />
Press B or b to select Automatic Power Down.<br />
Press C or c to select On or Off, and press OK.<br />
NOTE:<br />
• This feature is set to On when Location is set to Home.<br />
• 1 minute before switching to standby, a Warning message<br />
will appear.<br />
• When the following features are set, the feature that is set<br />
for the nearest time will function.<br />
- Automatic Power Down<br />
- Sleep Timer<br />
- Photo Frame/Auto Power Off<br />
- Auto shutdown after 1 hour of inactivity (after power on by<br />
On Timer)<br />
- No signal auto power off (after 15 minute of no signal)<br />
English<br />
The TV will automatically turn itself off after 15 minutes when no<br />
signal is detected. You can change the setting to Off for the<br />
following purposes:<br />
• Low signal strength of analog channel (no signal detection)<br />
• Only Audio L/R is connected to external input to listen to<br />
music through the TV speakers.<br />
a<br />
No Signal Power Down<br />
In the Energy Saving Settings menu, highlight No<br />
Signal Power Down, and press OK.<br />
b<br />
Press B or b to highlight the item you want to change,<br />
and press C or c to select On or Off.<br />
NOTE:<br />
• Default setting is all On.<br />
• A warning message will appear 1 minute before turning off.<br />
63