Owner's Manual SSP-600 Surround Processor - Classé Audio
Owner's Manual SSP-600 Surround Processor - Classé Audio
Owner's Manual SSP-600 Surround Processor - Classé Audio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
cautionary note on Fkey use<br />
Note that all Classé remote controls provide these same four Fkeys, so that you<br />
need not worry about which remote you happen to pick up. Thus F1 on the<br />
surround processor’s remote control sends the same infrared signal as F1 on the<br />
CD player’s remote control.<br />
While this is intended to minimize confusion amongst different remotes (since<br />
this aspect of them will all perform identically), you should take care when<br />
assigning different functions on different components to the same Fkey. Doing<br />
so would result in two components doing two different things at once, in<br />
response to a single press of a button on the remote control. This can sometimes<br />
be useful. As an example, F1 could set the surround processor to the CD input,<br />
and also set the CD player to Play, both from the press of a single Fkey.<br />
status<br />
The status screen provides several items of information about the current<br />
operation status of the <strong>SSP</strong>-<strong>600</strong>, as well as access to information on the software<br />
used in and the internal sensors of the <strong>SSP</strong>-<strong>600</strong>.<br />
version info<br />
The version info button on the status screen takes you to the version<br />
information screen, which displays information on various pieces of software<br />
used by your <strong>SSP</strong>-<strong>600</strong>. If you ever have occasion to call our technical support<br />
people to ask a question not covered in this manual, they may want to know<br />
precisely what version of software your unit is running. Having this information<br />
available will help enable them to give you the best possible service.<br />
sensors<br />
The sensors button on the status screen takes you to the sensors screen, which<br />
displays information about several internal sensors within the <strong>SSP</strong>-<strong>600</strong>. It is<br />
unlikely you might need the sensor information, unless directed to do so by a<br />
customer service representative at Classé in order to help troubleshoot some<br />
unexpected problem.<br />
55